ECL Series Manipulators

ECL Series Electric Column Lift Manipulators

Featuring fully articulating arms and end effectors, ECL Series manipulators provide increased lifting power and the capability for fine height adjustment in applications where close tolerance positioning is critical. The electrically-powered chain/sprocket drive provides lifting and lowering while the end-of-arm controls provide three-speed vertical height adjustment.

Manually-guided articulating arms are available with radial reaches up to 96 inches. The unique linkage design allows smooth, continuous movement throughout the work area. Horizontal movement is not restricted by vertical supports, cabling, or vacuum hoses. This permits the arm to maintain the attitude of the load for reach-in or reach-under applications.

Standard Features & Specifications

Load Capacity:	250 lbs. at 96" from column
Lift Stroke:	54"
Lift Speed:	3 speeds up to 6 inches/second with push-button control
Articulating Arm:	Standard lengths for tubular and bridge style arms of 72" and 92" from carriage pivot to end of arm pivot
Arm Rotation:	270°
Column Height:	100"
Baseplate:	16" x 16" x 1"
Construction:	Welded carbon structural steel
Finish:	Black oxide (column); electrostatic powder coating in safety yellow (arm & carriage)
Controls:	Up/Down lever-actuated switch on arm or end effector
Power Requirement:	200-240 VAC single phase

Options

Variety of lift strokes and load capacities
Various articulating arm lengths and designs
Overhead mounting systems
Mobile unit with forklift slots, casters, or mounted to a pallet jack
Stainless steel construction for sanitary or corrosive environments
Other special materials and finishes available
Lever arm, push-button or pendant controls
Standard and custom end effectors (click here)

Shown with customized end effector.


ECL MotorPicker	ECL Assembly Model	ECL Manipulator

ECL Manipulator	ECL Cleanroom/Computers	ECL Sheet Handling with Power Tilt

Site Map

Unidex, Inc.
2416 Main Street, Warsaw, NY 14569
Toll-Free: 800-724-1302 / Phone: 585-786-3170 / Fax: 585-786-3223

All Unidex products are manufactured in the U.S.A. and feature a comprehensive one-year warranty.
As part of our program of continuous improvement, product specifications are subject to change without notice.
© Unidex, Inc. All rights reserved.